6.2 Electrical Mounting
•
Please solder a cable (for ex.. LiYCY 0,5 mm² ) to the attached connecting plug acc. to the
respective connecting diagram (see also chapter 9).
•
Plug-mounting see chapter 6.
Remark:
Connections 6 and 7 are not used by the connecting plug at the model without
heating.
6.2.1 Plug mounting
Coupling socket, Typ:Binder, Serial 423, EMC with cable clamp
Cable connection:
without
cable shield
Cable- pull- relief
1. Stringing parts on cable acc. to plan given above.
2. Stripping cable sheath 20 mm
3. Cutting uncovered shield 20 mm
4. Stripping wire 5mm.
5. Soldering wire to the insert
6. Positioning shield in cable clamp.
7. Screwing-on cable clamp.
8. Assembling remaining parts acc. to upper plan.
9. Tightening pull-relief of cable by screw-wrench (SW16 und 17).
Cable clamp
Cable sheath
Wire
10 - 18
021326/05/10
