D/^^/KEϲ<භϭϬ<
^/E'>W,^
Rev. 02 –13 October 2015
22
When under the parallel ID setting press On
ź
or when under parallel redundancy quantity setting press Off
Ÿ
,
it goes to the parallel quantity setting. The parallel quantity flashes as in above picture.
•
Use button Enter
3
to set the parallel quantity. The parallel quantity range is 2~4.
•
Press
Ÿ
or
ź
to exit the parallel quantity setting (save the parallel quantity setting) and goes to parallel
ID setting or parallel redundancy quantity setting.
4.3.12 Parallel redundancy quantity setting
Parallel redundancy quantity setting (Note: Inside the broken-line is the flashing part.)
When under the parallel quantity setting press On
ź
, it goes to the parallel redundancy quantity setting. The
parallel redundancy quantity flashes as in above picture.
•
Use button Enter
3
to set the parallel redundancy quantity. The parallel redundancy quantity range is
0~1
•
Press
Ÿ
to go to parallel quantity setting, or
ź
to exit the mode setting. Then UPS LCD panel setting is
accomplished.
YOUR CONNECTION TO SAFETY
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• www
.thiele-kg.de
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• www
.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK
