D/^^/KEϲ<භϭϬ<
^/E'>W,^
Rev. 02 –13 October 2015
14
1. When the UPS is connecting with the Utility or Battery at cold start mode, it shows as drawing below:
(1) Operational Status and mode
1)
Operational Status and mode When the UPS at single mode, it shows “NOA” or “ECO”, but If the UPS at
parallel mode, it shows “PAL” instead.
2) Press “scroll” button, the UPS goes to next page as shown below.
Battery
˄
2
˅
Input voltage
˄
3
˅
Bat + voltage (Positive)
Output
˄
4
˅
Bat – voltage (Negative)
˄
5
˅
Output voltage
δ
6
˅
Load
(7) PFC/ Ambient temperature up,
only shows the high temperature
Internal temperature
˄
down
˅
20% load per grid
YOUR CONNECTION TO SAFETY
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• www
.thiele-kg.de
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• www
.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK
