5
Installation Continued
RV and Marine Models
7. Insert a screwdriver or other long rigid instrument under
toilet. With a sharp blow drive each slide back until it
slides under nut and snaps into position.
8. If slides cannot be driven by one or two blows, remove
toilet and adjust each nut one-half turn upward and repeat
procedure from Step 6.
9. If toilet wobbles excessively, remove slides by catching
tabs with a hooked instrument and pulling forward, as
shown below. Lift toilet off, adjust each nut one-half
turn downward and repeat procedure from Step 6.
Extension Handle Valve
Toilet Model 24320 Only
Multiple positions using extension handle valve:
08707 slide-eZ Valve
08737 screw
02792 lockwasher
08636 Mounting Bracket
03915 screw
08737 screw
02792 lockwasher
08707 slide-eZ Valve
08636 Mounting Bracket
12979 Base Moulding
05248 Base Moulding
03915 screw
Enfocus Software - Customer Support