6
How to use a product
v
Installing the Equipment
For companies such as PC rooms, cafes, and restaurants that have limited
space for tripods, equipment use may be restricted. We offer S/W for
Windows so you can use your PC with minimal space on the tripod.
S/W for Windows OS can be downloaded via the archive at THERMORAY
homepage(www.thermoray.co.kr).
The installation method of the product is based on the use of the tripod
of the existing [MT-01] model, and the installation method is as follows.
§
Extend the legs of the folded tripod in the right direction.
§
Use the tripod’s height adjustment device to adjust the height of the
tripod to suit your environment.
§
Place the fixing screws of the tripod on the thermal imaging camera
fixing port.
§
Rotate the thermal imaging camera clockwise to secure the screw.
§
Rotate the camera fixing screws on the tripod to tighten the thermal
imaging camera and the tripod.
§
Loosen the camera orientation fixing screw on the tripod by turning
in counterclockwise.
§
Adjust the orientation of the thermal imaging camera by operating
the camer adjuster.
§
Rotate the camera orientation fixing screw on the tripod clockwise to
secure the thermal imaging camera.
§
Connect the thermal imaging camera to your PC using a USB cable
that can send and receive data.
※ The USB cable is Micro 5 pin to USB A.
If you need a tripod that is higher than the standard tripod, you can
purchase it separately at THERMORAY homepage (www.thermoray.co)
