10
v
Program Configuration
On the main screen, the thermal image is displayed, and the degree of
the part recognized at the highest degree in the thermal image will be
pointed out. You can also immediately check if the displayed
temperature is in the desired temperature setting. See below for more
information
N0.
Description
1
• Display the screen taken by the thermal imaging camera
2
• Move to the settings screen
3
• Provides whether it corresponds to the desired temperature settings based
on the highest degree from “No.1” (WARM,OK)
4
• List checked as “WARM” on the main screen.
5
• Provides whether it corresponds to the desired temperature settings based
on the highest degree from “No.1” (WARM,OK)
6
• On/off the alarm when “WARM (remeasurement)” is displayed in “No.3”
7
• Open the thermal image that was checked as “WARM” in “No.3”
2
1
3
4
5
46
7
