Thermona Therm 28 KD Скачать руководство пользователя страница 9

Recommendation: 

We recommend that the operation of boilers without weather-compensated regulation be controlled at least by a 

basic room thermostat. The room temperature is constant and it keeps the boiler in longer operation modes. It is 
also recommended to set the boiler thermostat for 60 ºC in autumn and spring and for 80 ºC in winter. It is 
advisable to use the inbuilt weather-compensated regulation that can be also complimented by a room thermostat, 
as it is suggested bellow. 

These expansion regulation types are 

not delivered

 with the boiler. 

 

 

STARTING THE BOILER 

Only a service technician certified by the manufacturer is authorised to put the boiler in operation for the 
very first time.  

Before the boiler is ignited for the first time, it is necessary to take the following measures: 

™

 

Make sure that the heating system is filled with water and the boiler properly deaerated. 

™

 

Make sure that all the valves are open. 

™

 

Open the gas cock and check the tightness of the gas distribution system in the boiler. 

These are the steps to be taken when igniting the boiler for the first time: 

™

 

Set the adjusting revolving knob of the outlet temperature at the maximum. 

™

 

Plug the cable into the socket and start the boiler by turning the mode switch. 

™

 

Turn the mode switch for a short time to malfunction-unblock position, so that the boiler gets automatically 

ignited (this happens only if the gas inlet has been deaerated). 

™

 

Check whether all safety thermostats and control elements are working properly. 

™

 

Check the setting-up of the boiler’s output range and, if necessary, adjust the setting according to the 
requirements of the heated premises. 

 
Warning: 

The setting of boiler’s output range and other parameters must follow the manufacturer’s technical 

specifications. Any overloading or improper operations of the boiler can cause damage to its components! The 
components damaged in this way are not covered by the guarantee.
 

 

DISCONNECTING THE BOILER 

       For shorter periods, the boiler can be switched off by the mode switch or by the switch on the room thermostat.  
For long-term disconnection outside the heating season (e.g. during the summer holiday) it is advisable to close the 
gas gas cock. 

6.  INSTRUCTIONS FOR OPERATION AND MAINTENANCE 

 

 

OPERATING THE BOILER 

 

The boiler may be operated only by a person older than 18 years. 
 

 

Manometer 

Knob for 
DHW 
temperature 
setting 

Knob for 
heating 
temperature 
setting 

Mode 
switch 

LCD display 

Service buttons 

 
 
 
 
 
 
 
 
 
 
 
 

 
 

 
 

 

9

 

™

 

Service buttons 

– are used for diagnostics and setting-up of the boiler parameters

 

Содержание Therm 28 KD



























Отзывы: