Models TGO-80W, 150W, 240W Glassware Drying Oven Manual
26-1-16
7
a) Turn the thermostat knob fully clockwise and allow time for the oven to stabilize at
the highest set temperature.
b) Once the temperature is stable the over temperature thermostat can be adjusted.
c) Turn the over temperature thermostat anticlockwise until the red light on the front
control panel is illuminated.
d) Now slowly turn the over temperature thermostat clockwise until the light (just) goes
out.
The over temperature thermostat is now set at a temperature just above the ‘set’ oven
temperature to prevent accidental overheating.
Please be aware that the thermostat is a simple device that is less accurate than
the digital controls. It should not be set too close to the operating temperature in
case it interferes with control.
13:
Loading:
All forced draught ovens such as this one require constant air flow throughout the
cabinet to maintain the desired temperature. Correct loading of the shelves must be
considered for efficient performance.
•
Allow air space around the product on each shelf.
•
Distribute the load evenly over all of the shelves rather than stacking everything on
one shelf.
For maximum drying capacity the fan speed should be on high and the exhaust vent
should be open. The knob for the exhaust vent is on the side of the oven. Pull the knob out
to open the vent.
