Models TGO-80W, 150W, 240W Glassware Drying Oven Manual
26-1-16
2
Introduction:
Thank you for selecting this equipment from the large range of products
manufactured & imported by Thermoline Scientific.
This manual covers the operation, cleaning, & maintenance instructions for this
equipment. Incorrect operation or use can cause harm or damage to the equipment,
therefore it is very important that you read, understand, and implement the instructions, to
ensure reliable operation.
Please keep this manual in a safe place for future reference.
LIST OF CONTENTS:
INTRODUCTION:
2
LIST OF CONTENTS:
2
UNPACKING:
2
USE AND FUNCTION:
2 & 3
LOCATION & INSTALLATION:
•
Location:
•
Mains connection:
•
Control Panel
3 to 5
OPERATION:
•
Changing the temperature:
•
Setting duration time.
•
High Temp Safety.
•
Loading.
5 to 7
CLEANING:
8
Calibration:
8 & 9
WARRANTY:
9 & 10
UNPACKING:
Remove the equipment from the packing material and check for damage. Notify the detail
of any damage to your supplier or to Thermoline Scientific without delay.
Retain the packing materials until the equipment has been thoroughly tested.
USE & FUNCTION:
The Thermoline glassware drying ovens are ideal for providing effective drying of
laboratory equipment and removal of moisture from glass beakers/flasks etc.
•
Temperatures can be controlled accurately from a10ºC to +110ºC.
•
Digital temperature control with set temperature and internal temperature displayed
to one decimal place.
•
Electronic control of heating element for optimum temperature control.
•
Timer function available on temperature control to turn off heating after a pre-
determined time.
•
In-built over temperature feature in the digital temperature control. If the
temperature rises above the set value by more than 3ºC, the heating is shut down.
•
High temperature safety thermostat (operator adjustable).
•
Fan forced air circulation, with 2 fan speeds.
•
Adjustable air exhaust vent.
•
Adjustable open wire shelves.
•
Viewing door.