manualshive.com logo in svg

Thermokon SRC-ADO 4AO 2DO, Руководство по эксплуатации

Поделиться
Скачать
Thermokon SRC-ADO 4AO 2DO Скачать руководство пользователя страница 55

Software description SRC-ADO

Thermokon Sensortechnik GmbH

                              Page 54

4.4.11 Shutter

In  the  output  function   “Shutter“ a  rocker  can  control  a  shutter  up and down.  The  shutter
function can only be selected on the outputs DO1 respectively DO3 in the main menu. The
outputs DO2 respectively DO4 are automatically used for the shutter function.

A  rocker  is  effecting  on  2  relay  outputs.  The  button  ( )  affects  output  DO1  respectively
DO3. The button ( ) affects output DO2 respectively DO4. The outputs are locked against
each other by the software, so that always only one relay is switched.

4.4.11.1 Register Card Property

  Long button actuation

o

  A short button actuation starts the automatic run and controls the shutters for the

running-after time continuously in the direction open respectively close.

o

  The automatic run can be stopped by a renewed button actuation

o

  A long button actuation is designed for the manual adjustment of the shutter

  Output

o

  In the field “Output“ the current status of the output is displayed by activating the

hook mark.

4.4.11.2 Register Card Sensors

  Number of sensors

o

  Up to 15 buttons can be selected and assigned to the output

Picture 4-28: Shutter

Содержание SRC-ADO 4AO 2DO
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды