Software description SRC-ADO
Thermokon Sensortechnik GmbH
Page 31
4.3.7 Dimming and constant light control Type3
Dimming and constant light control is only on SRC-ADO Type 3 available.
If a relay should be switched during the dimming, the function Dimming –1 – button
operation respectively Dimming – 2- button operation must be selected on one digital
output and the button from the analogue dimming function must be assigned.
Register Card Property
Switch Adjustment
o
Long button actuation
o
Time from which the output shall dim
o
Step size dimming
Adjustable by how many percents the output shall be changed per
interval
o
Update Interval
Adjustable in which timer interval it should be dimmed
o
Running time
Delay time to switch off ligth
o
Ligth set point
Set point at working surface
Set point could be adjusted by pressing 3 to 4 times On-Button of a
learnt-in switch
New set point will be available after light is set off and on 2 times
o
Ligth 100% SR-MDS/table
As the sensitiviy of the light sensor compared to artificial light is among
others depending on the light source, the location of the sensor and the
reflection characteristics of a room, the sensitivity must be determined by
the configuration parameter.
Shadow with blind, that no day ligth is available
If no shadowing is possible, measure in the morning or evening
Light intensity with 100 % artificial light
Left field: measured by device SR-MDS
Rigth field: measured at the working surface by a reference device
Output
o
In the field “Output“ the current status of the output can be displayed by
activating the hook mark.
o
Lower output voltage and output voltage
Scaling of output voltage in the range 0-10V
4.3.7.1 Register Card Sensors
Number of Sensors
o
Up to 15 sensors can be selected and assigned to the output
