ThermoFLUX PELLING 25 ECO, Руководство по эксплуатации и обслуживанию, Страница: 51 / 58

PELLING ECO
51
13.1 The process for firing wood
Remove all the turbulators from the pipe exchanger, located in the upper part of the
boiler, then remove the metal rack and cast iron burner (container in which burns
pellets) from the combustion chamber.
On the cradle from which you removed cast iron burner placed metal air flow
regulator (the round metal part with holes), set the grid to the appropriate carrier
inside the boiler and install a protective flap on the tube dispensers.
Manually do the process of ignition and when the wood is fired, close all the doors
and on the display to switch to wood-firing.
In every additional firing wood ie. when the doors are opened, it may not be open
for longer than 30 seconds. After closing the door, wait for the negative pressure in
the boiler again stabilizes and repeat the process if you have not put the appropriate
amount of burning fuel in the boiler.