Section 2 Overview
2.1 Specifications
Speed Range...........................................................30 to 600rpm
Speed Accuracy...................................................................±2rpm
Orbit Diameter....................................................................
￠
3mm
Motion Type.........................................................................Orbital
Speed Display...........................................................................LED
Maximum Load…………………………………............10kg @
≤
150rpm
Timing Range…………..……........................................0~99h 59min
Hour Display.……..........……............…...........……..........…….........LED
Minute Display...........…....................……....................…….........LED
Main body....................360×300×101mm(14.2×11.8×4.0inch)
Control Box...........................213×95×26mm(8.4×3.7×1.0inch)
Net Weight (Main body)..................................16.0kg(35.27lbs)
Net Weight (Control Box).....................................0.3kg(0.66lbs)
Gross weight.....................................................17.8kg(39.24lbs)
Requirement............................................AC100-240V, 50/60Hz
Certification.............................RoHS, WEEE, cCSAus, CE Mark,
FCC, CA 65, REACH, ICES-001
Noise level...........................................................................
＜
60dB
Application Environmental Conditions: indoor use
Temperature....................................................................4 to 60
℃
Altitude...........................................................................
≤
2,000 m
Humidity...................................................................... 20% to 99%
Co
2
Concentration........................................................0% to 20%
Storage Environmental Conditions
Temperature....................................................................5 to 60
℃
Altitude...........................................................................
≤
2,000 m
Humidity.......................................20% to 99%, non-condensing
2.2 Environmental Conditions
Rotation Speed
Load
Timer
Dimensions
Weight
Power Supply
Others
5 Section 2 | Overview
2.3 Safety Tips
1. Unplug and unload before moving the
unit.
2. This instrument uses a single-phase
AC100-240V 50/60Hz power supply.
3. Remove the power supply when the
instrument is in maintenance.
4. Do not clean the unit with flammable
or corrosive liquid.
5. Use specified power supply.
6. Maximum load 10kg(22.05 lbs) @
≤
150 rpm.
7. To ensure proper operation, the unit
must be free of surrounding
obstructions.
2.4 Storing the signal Cable
To store the signal cable, simply open the
side plate on the main body.
Refer to Figure 2-1. The signal cable can
be placed inside.
1) Main body of CO2 resistant shaker
2) Side plate
3) Control box
Caution:
When storing the cable, pay
attention to closing the side plate door, to
avoid pinching your fingers.
▲
③
①
②
Figure 2
-
1
MaxQ 2000 CO2 Plus 6
88883101
