ThermoFisher Scientific HERASAFE 2030i Series, Руководство по эксплуатации

Страница: 88 / 173

| Operation
78
|
50155215 Herasafe 2030i / Maxisafe 2030i
Chapter 6

“Time”; see “Setting the Time of Day” on page 80

“Unit Name”; see “Setting the Unit Name” on page 83

“Menu Bar Customization”; see “Customizing the Menu Bar” on page 84

“Region”; see “Setting the Region” on page 85
Setting Brightness
Brightness is set on the main “Display Settings” screen shown in Figure 71.
Proceed as follows to change brightness of the screen:
1. Tap the “Settings” icon on the Main Navigation Bar.
2. Tap the “Display Settings” button on the “Settings” screen.
3. Tap the “Brightness” button on the “Display Settings” screen.
4. Drag the “Brightness” slider button to the right or to the left, or tap the plus (“+”) or
(“-”) button to increase or decrease.
If you have made any changes, the “Save” button appears at the bottom of the
screen.
5. When you are done adjusting brightness, tap the “Save” button.
6. To commit the changes, tap the “OK” button in the pop-up window that appears (see
“Saving Changes” on page 95).
You will be returned to the “Display Settings” screen.
Setting the Display Language
The “Language” button on the “Display Settings” screen opens the “Language” screen
where you may choose a display language of your choice. This setting overwrites the
display language selection made during the initial setup, as described in the section
“Initial Setup” on page 37.
Proceed as follows to set the display language:
1. Tap the “Settings” icon on the Main Navigation Bar.
2. Tap the “Display Settings” button on the “Settings” screen.
3. Tap the “Language” button on the “Display Settings” screen.