ThermoFisher Scientific HERASAFE 2030i Series, Руководство по эксплуатации

Страница: 95 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 85
Operation |
Chapter 6
The “Menu Bar Customization” screen appears, as shown in Figure 80 below.
Figure 80 “Display Setting” Screen: “Menu Bar Customization” Screen with Icon Swapping
Options
4. Tap one of the five icons in the center of the “Menu Bar Customization” screen.
5. Drag the icon on top of one of the three highlighted icons in the left-hand Main
Navigation Bar.
The icon you have just dragged will appear in the Main Navigation Bar. The icon
previously displayed in the Main Navigation Bar will appear among the five icons in
the center of the screen, along with the pertinent text label.
If you have made any changes, the “Save” button appears at the bottom of the
screen.
6. When you are done customizing the Main Navigation Bar, tap the “Save” button.
7. To commit the changes, tap the “OK” button in the pop-up window that appears (see
“Saving Changes” on page 95).
You will be returned to the “Display Settings” screen.
Setting the Region
The “Region” button in the “Display Settings” screen opens the “Region” screen shown in
Figure 81 below. The “Region” screen lets you enter a city and country combination.
Proceed as follows to set the region:
1. Tap the “Settings” icon on the Main Navigation Bar.
2. Tap the “Display Settings” button on the “Settings” screen.
3. Tap the “Region” button on the “Display Settings” screen.
Thermo Fisher BSC
11:42 AM | 08/10/2018
Menu Bar Customization
Save Reset Menu Bar
To replace a shortcut, drag it on any
outlined item in the menu bar on the left.
Display
Settings
Access
Control Disinfection
Cycle Settings
Factory
Settings
Field