ThermoFisher Scientific HERASAFE 2030i Series, Руководство по эксплуатации

Страница: 47 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 37
Start-up |
Chapter 5
Initial Setup
This section explains how to set up the device using the initial setup routine.
When the unit is turned on for the first time after delivery to the customer site, you must
complete an initial setup process before you can use the unit. There are five single
screens with initial adjustments you must make and confirm using the “Next” button to
complete the full setup.
On some screens, you may return to the previous screen by tapping the “Back” button. At
the top of each screen a step counter shows your progress through the setup routine,
indicating the number of the current step and the total number of steps, for example
“Step 2 of 5”. A screen title appears directly underneath the step counter to indicate
where you are in the setup routine.
Proceed as follows to start up the unit:
1. Power up the device by connecting the external power source.
A startup screen with a “Start Setup” button appears, prompting you to run the setup,
as shown in Figure 16 below.
Figure 16 Initial Startup: Startup Screen
2. Tap the “Start Setup” button.
The “Language” screen appears with a wheel picker, prompting you to choose a
display language, as shown in Figure 17 below.
Figure 17 Initial Setup: Setting the Language
Start Setup
Language
Step 1 of 5
Back Next
English