ThermoFisher Scientific HERASAFE 2030i Series, Руководство по эксплуатации

Страница: 93 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 83
Operation |
Chapter 6
6. To commit the changes, tap the “OK” button in the pop-up window that appears (see
“Saving Changes” on page 95).
You will be returned to the “Display Settings” screen.
Setting the Unit Name
You may set a name for the unit that will be displayed above the time/date field in the Info
& Health Status Area at the top of all screens.
Proceed as follows to edit the name of the unit:
1. Tap the “Settings” icon on the Main Navigation Bar.
2. Tap the “Display Settings” button on the “Settings” screen.
3. Tap the “Unit Name” button on the “Display Settings” screen.
The “Unit Name” screen appears, as shown in Figure 78 below.
Figure 78 “Display Settings” Screen: “Unit Name” Screen
4. Inspect the “Unit name” field:
If no unit name has been previously set, the “Unit Name” field will read “Tap to enter” .
If a unit name has been previously set, that name appears in the “Unit Name” field.
5. Tap on the “Unit Name” field to display a full keypad, as shown in Figure 79 below.
If no unit name has been previously set, a cursor will appear in the “Unit Name” field
and prompt you to start typing.
Thermo Fisher BSC
11:42 AM | 08/10/2018
Unit Name
Save
Unit Name Thermo Fisher BSC