manualshive.com logo in svg

ThermoFisher Scientific HERASAFE 2025, Руководство по эксплуатации

Поделиться
Скачать
ThermoFisher Scientific HERASAFE 2025 Скачать руководство пользователя страница 64

   |   Maintenance

64 

 |  

50161258

Herasafe 2025

Chapter 10

Sample Chamber Illumination

The tubes are installed in the front cover bezel.

1. Remove the bezel retaining screws and the bezel.

2. The tubes are retained by rotatable sockets. Rotate the tube carefully to the removal 

position and remove it from the socket. 

3. Insert the replacement tube and rotate it to the working position.

4. Reinstall the bezel and secure it with the screws.

Replacing the Front Cover Seal

Retrofitting and Repairs

External communication systems, e.g. failure report systems or components for supplying 
media such as gas solenoid valves can be retrofitted and integrated into the device control.

NOTE  Front cover seal
Check front cover seal in regular intervals, at least once a year.
If seal is damaged call Technical Support.

NOTE  Repairs
All retrofitting and repair work are interferences with the safety system of the 
unit. Particularly modifications to the filter system and resulting changes of the 
airflow may impair personal and material protection. Such work must be 
carried out only by authorized service personnel.

Содержание HERASAFE 2025













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды