ThermoFisher Scientific HERASAFE 2025, Руководство по эксплуатации

Страница: 46 / 76

| Operation
46
|
50161258
Herasafe 2025
Chapter 6
Switching the Cabinet to OFF-Mode
The unit can be switched to OFF mode from any other operating mode:

Move front window completely down

Keep the key depressed until ready signal sounds.
Setting Time
The current time of the time zone in which the unit operates must be set at the start-up of
the safety cabinet. Two different display modes can be selected:

CET-Mode (24:00 hours)

AM- / PM-Mode (12:00 hours)
To set the time, the unit must be switched on and the front window must be outside the
working position.
1. Setting time:
Keep the key depressed, until the two-digit hour display flashes.
The minute display shows either A, P or no value (CET time display). The time zone is
set at the same time as the hour value: First, set the time zone (sequence: CET, A, P),
then set the exact hour value.
2. While increasing or decreasing the hour value in increments, set the time zone:
Shortly press key or key .
3. Scroll thru values:
Depress key or key .
If the keys are depressed for approx. 2 or 3 seconds, a higher scroll speed is
selected.
4. Store the hour and time zone setting
Shortly press key .
The function switches to minute display (flashing).
5. Setting the minutes:
Shortly press key or key .
6. Scroll thru values:
Depress key or key .
If the keys are depressed for approx. 2 or 3 seconds, a higher scroll speed is
selected.