ThermoFisher Scientific HERASAFE 2025, Руководство по эксплуатации

Страница: 10 / 76

| General Notes
10
|
50161258
Herasafe 2025
Chapter 1
General Safety Instructions
These safety instructions describe the safety features of the Herasafe 2025 series.
The safety cabinet has been manufactured in keeping with the latest technological
developments and has been tested before delivery for its correct function. It may, however,
present potential hazards if it is not used according to the intended purpose or outside of
operating parameters. Therefore, the following procedures must always be observed:

The safety cabinet must be operated only by trained and authorized personnel.

For any operation of this unit, the operator must prepare clear and concise written
instructions in the language of the operating and cleaning personnel based on these
operating instructions, applicable safety data sheets, plant hygiene guidelines, and
technical regulations, in particular:

which decontamination measures are to be applied for the cabinet and accessories,

which protective measures apply while specific agents are used,

which measures are to be taken in the case of an accident.

Repairs to the device must be carried out only by trained and authorized expert personnel.

The contents of the operating instructions are subject to change without further notice.

Concerning translations into foreign languages, the German version of these
operating instructions is binding lease.

Keep these operating instructions close to the unit so that safety instructions and
important information are always accessible.

Should you encounter problems that are not detailed adequately in these operating
instructions, please contact Thermo Electron LED immediately for your own safety.
Warranty
Thermo Electron LED warrant the operational safety and functions of the safety cabinet
only under the condition that:

the device is operated and serviced exclusively in accordance with its intended
purpose and as described in these operating instructions,

the device is not modified,

only original spare parts and accessories that have been approved by Thermo
Electron LED are used,

inspections and maintenance are performed at the specified intervals,

an installation test is performed prior to the initial operation of the device and that a
repeat test is performed on the occasion of all inspections and repairs.
The warranty is valid from the date of delivery of the device to the operator.
Impairment of the system may lead to hazards.