THERMOFILM AUSTRALIA 27 Rosalie Street, Springvale VIC 3171
Ph: 03 9562 3455 Fx: 03 9548 3979 www.thermofilm.com.au
E L E X
e u r o
C
O
N
V
E
C
T
I
V
E
P
A
N
E
L
H
E
A
T
E
R
S
3.3.4 Selecting the Constant Frost Protection Operation
To protect against freezing temperatures in cold climate areas you can programme the heater for frost
protection by reducing the set temperature to 5°C while the heater is in “
CO
” mode.
When the temperature is set to 5°C the
symbol will display on the screen and the heater will
operate when the room temperature falls below 5°C.
3.3.5 Setting the Self Set Weekly Operation
This function allows you to program for ON/OFF times 24 hours a day, 7 days per week.
Press the mode button
. The mode symbol
will flash
.
Use the up
or down
button to select the programme mode of
SS.
Press the mode button
again to complete the setting. The mode symbol
SS
will stop flashing.
Selecting the Day
Press the programme button
. The symbol “[ ]” will appear around the current day e.g.
M
(Monday). The time will show (00:00, midnight), and the symbol
PROG
are displayed.
If you want the programme to start another weekday, for example the Tuesday, press the
timer button
consecutively, until the symbol “[ ]” surrounds
T
(Tuesday)
on the screen.
Selecting Times for a Full 24 hour Day
Note: The zone for “OFF” is blank and the zone of “ON” is black on the digital clock face diagram.
The up button
is used for setting the “ON” Zone, and the down button
is used for setting
the “OFF” Zone. The timer will start at 00:00, and each push of the up or down button will advance
the clock by one hour. Push the appropriate
or
button to set the desired “ON” or “OFF”
time for the day. You must programme the full 24 hour ON / OFF period (until the time reaches
00:00) for the timer to function correctly.
Press the
programme button
to complete the setting for the day.
For example, you would like to make the unit work from 1:00 to 4:00,
11:00-13:00, and from 17:00 to 23:00.
Step 1
: Press the button
. The time will change from 00:00 to 1:00, and the zone between 24:00
to 1:00 will be blank (OFF).
Step 2
: Press the button
until the time advances to 4:00, and the zone between 1:00 and 4:00 be
black (ON).
Step 3
: Press the button
until the time advances to 11:00, and the zone between 4:00 to 11:00
be blank (OFF).
Step 4
: Press the button
until the time advances to 13:00, and the zone between 11:00 to 13.00
will be black (ON).
