THERMOFILM AUSTRALIA 27 Rosalie Street, Springvale VIC 3171
Ph: 03 9562 3455 Fx: 03 9548 3979 www.thermofilm.com.au
E L E X
e u r o
C
O
N
V
E
C
T
I
V
E
P
A
N
E
L
H
E
A
T
E
R
S
3.3 Programming the Timer
The timer must be set in order to use the Self-Set Weekly Operation Programme.
3.3.1 Programming the Clock
Day Setting
Press timer button.
The “[ ]” symbol will flash around
M
(Monday). Use the up
and down
buttons to move the “[ ]” symbol to the correct day.
M
Monday
T
Tuesday
W
Wednesday
T
Thursday
F
Friday
S
Saturday
S
Sunday
Note: The “[ ]” will flash when used for the first time, or after a lengthy absence of power, and the
red “ON” light will glow.
Hour Setting
Press timer button.
The hour number will flash. Use the up
and down
buttons to set
the correct hour.
Minute Setting
Press the timer button.
The minute number will flash. Use the up
and down
buttons to
set the correct minute.
Press the timer button
again to complete the timer setting.
The control panel will show the current time and the unit will operate under the default programme
of “CO” (Constant Heating Operation).
3.3.2 Setting the temperature
Press the temperature setting button
. The centre of the digital clock face will flash with the
heating operation and temperature setting (e.g. “
CO 21
”). Use the up
and down
buttons
to set the required temperature. Note: The default temperature is 21 ºC.
Press the temperature button
again to complete the temperature setting.
3.3.3 Selecting the Constant Heating Operation
The constant heating operation is the default setting of the heater, and this will run when the heater is
used for the first time, or after a lengthy absence of power. The temperature setting may be altered as
per section 3.3.2.
To select this setting, press the mode button
. Use the up
and down
buttons to select
the
CO
programme
.
The temperature setting may be altered as per section 3.3.3.
Press the mode button
again to terminate the setting. The mode symbol will stop flashing. The
mode is now active and will run in “real time”.
