manualshive.com logo in svg

Thermo Spectronic BioMate 3, Руководство по обслуживанию, Страница: 4 / 180

Поделиться
Скачать
Thermo Spectronic BioMate 3 Скачать руководство пользователя страница 4

NEW PRODUCT WARRANTY 

 
Thermo Electron Corporation instrumentation and related accessories are warranted against defects in 
material and workmanship for a period of one (1) year from the date of delivery. This warranty is provided 
only if the warranty registration card is returned to Thermo Electron Corporation within fifteen (15) days 
after delivery. 
 
This warranty covers parts (except those specified below) and labor, and applies only to equipment which 
has been installed and operated in accordance with the operator's reference guide and which has been 
serviced only by authorized Thermo Electron Corporation dealers or service personnel. This warranty 
does not apply to equipment and accessories that have been modified or tampered with in any way, 
misused, or damaged by accident, neglect, or conditions beyond Thermo Electron Corporation’s control. 
 
This warranty does not apply to lamps, glassware, and similar expendable components. However, their 
manufacturer may warrant such parts and components. 
 
Thermo Electron Corporation is not responsible under this warranty for loss in operating performance due 
to environmental conditions. 
 
THIS WARRANTY IS IN LIEU OF ALL WARRANTIES EXPRESSED, IMPLIED, OR STATUTORY, 
INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR 
MERCHANTABILITY OR OTHERWISE, and states Thermo Electron Corporation’s entire and exclusive 
liability and the Customer’s exclusive remedy for any claim in connection with the sale or furnishing of 
services, goods, or parts, their design, suitability for use, installation, or operations. Thermo Electron 
Corporation will in no event be liable for any direct, indirect, special, or consequential damages, 
whatsoever, including loss of goodwill, whether grounded in tort (including negligence), strict liability or 
contract, and Thermo Electron Corporation’s liability under no circumstances will exceed the contract 
price for the goods and/or services for which liability is claimed. 
 

 

UPDATE POLICY 

 
Thermo Electron Corporation may, from time to time, revise the performance of its products, and in doing 
so incur no obligation to furnish any such revisions to any Thermo Electron Corporation customer. 
 

 

SOFTWARE PASSWORD 

 
This password allows you to enter the security section of the software used on your spectrophotometer. 
Through the security section, you can “lock” test setups (test parameters) so that they may not be altered. 
The password also allows you to remove the security so that you may edit the test parameters. Please 
refer to the appropriate section in your Operator’s manual for more information on locking a test. 
 

PASSWORD:  4 3 6 3 7 9 7 

 
 

iv 

Содержание Spectronic BioMate 3





















































































































































































Отзывы:

Нет отзывов