manualshive.com logo in svg

Thermo DCT7088, Руководство пользователя

Поделиться
Скачать
Thermo DCT7088 Скачать руководство пользователя страница 54

49

..... Service & returns

5.

Send the unit freight-paid to:

Thermo Electron Corporation
Process Instruments Division
9303 W. Sam Houston Parkway S.
Houston, TX 77099
USA

6.5.4 Upgrades

Thermo provides the most current software for your meter at time of shipment. Find out about upgrades by
contacting Thermo via mail, fax, phone, or web. Upgrades are available using the RS232 port and a
remote terminal.

6.6

Warranty Statement

Thermo products are warranted to be free from defects in material and workmanship at the time of
shipment and for one year thereafter. Any claimed defects in Thermo products must be reported within the
warranty period. Thermo shall have the right to inspect such products at Buyer’s plant or to require Buyer
to return such products to Thermo plant.

In the event Thermo requests return of its products, Buyer shall ship with transportation charges paid by
the Buyer to Thermo plant. Shipment of repaired or replacement goods from Thermo plant shall be F.O.B.
Thermo plant. A shop charge may apply for alignment and calibration services. Thermo shall be liable only
to replace or repair, at its option, free of charge, products which are found by Thermo to be defective in
material or workmanship, and which are reported to Thermo within the warranty period as provided above.
This right to replacement shall be Buyer’s exclusive remedy against Thermo.

Thermo shall not be liable for labor charges or other losses or damages of any kind or description,
including but not limited to, incidental, special or consequential damages caused by defective products.
This warranty shall be void if recommendations provided by Thermo or its Sales Representatives are not
followed concerning methods of operation, usage and storage or exposure to corrosive conditions.

Materials and/or products furnished to Thermo by other suppliers shall carry no warranty except such
suppliers’ warranties as to materials and workmanship. Thermo disclaims all warranties, expressed or
implied, with respect to such products.

EXCEPT AS OTHERWISE AGREED TO IN WRITING BY Thermo, THE WARRANTIES GIVEN ABOVE
ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND Thermo HEREBY
DISCLAIMS ALL OTHER WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS
FOR PURPOSE.

Содержание DCT7088














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды