8
Step 3: Install the safety shield
Slide the blue safety shield assembly onto the system and attach with four supplied M5 x 10 mm
1.
shoulder screws using a 3 mm hex wrench.
Lift the hood and attach the grounding strap from the stage to hood, as shown:
2.
Inside view when properly installed Outside view when properly installed
Step 4: Connect system power
Connect supplied power cable to the system and to a correctly installed line power outlet which
1.
has a protective conductor, also called earth or ground.
Step 5: Optional equipment setup
If using a wash station and/or external fluid connections, refer to the
Versette User Manual
for
1.
installation details.
Warning!
Ensure that the mains switch is in the
OFF (
O
) position. Never operate the instrument from a
power outlet that has no ground connection. Never
use a power supply cable other than the Thermo
Scientific power supply cable designed for your region.
Loosen the screw on outside, then attach
grounding strap to the inside with a screw,
lockwasher, and nut.
