Thermo Scientific TX-750, Инструкция по эксплуатации

Страница: 31 / 57

3
AutoLock
TM
Removing the Rotor
Thermo Scientific 75003607 TX-750
3-3
4. Close the centrifuge door.
Removing the Rotor
To remove the rotor, proceed as follows:
1. Open the centrifuge door.
2. Grab the rotor handle with both hands and press against the green AutoLock
TM
button. At the
same time, pull the rotor directly upwards with both hands and remove it from the centrifuge
spindle. Make sure not to jam the rotor while doing this.
Figure 4. Handling of AutoLock
TM
CAUTION
Check that the rotor is properly locked on the centrifuge spindle before each
use by pulling it a its handle.
Be sure to check all seals before starting any aerosol-tight applications.