4
Mount the door adapter.
{
Use the handle and screw in clockwise to
mount.
Tighten until the O-ring is compressed enough.
{
Check that shaft (D) of the rotor is positioned
approximately at the center of the center hole of
the door adapter.
If the eccentricity is too great, the door may
have been set to the incorrect position. Return
to step 3 and close the door firmly.
5
By means of the furnished screwdriver, loosen
2-3 turns six setscrews for stopper (A) of door
adapter.
Shaft (D)
Screwdriver
Stopper (A)
-16-
