Thermo Scientific Centri-Vue Application
63 of 73
Error Adding Centrifuges
If a centrifuge cannot be added to the overview menu, there are two possible reasons:
1.
A centrifuge with the same IP address is already stored in the local list. A pop-up message indicates the
error.
2.
The IP address has no valid format. The entered IP address must have the format (x.x.x.x). In addition, only
numbers may be included. If an IP address is entered in an invalid format the outline turns red and the
add device button will be disabled.
7.4.5
Edit Centrifuge Entry
The centrifuge entries in the overview menu can be edited or deleted. To edit a centrifuge entry, select the entry and
hold it (about 3 seconds). The edit menu will open with the following options:
1.
Select Edit to open the edit menu of the centrifuge.
2.
Select Delete to delete a centrifuge entry. Deletion is done, if the subsequent question is confirmed with
Yes.
3.
Select Cancel to switch back to the overview menu.
