•
Allow approximately 2" (5 cm) of clearance
around the unit for free air convection, accesso-
ry attachments and user convenience.
Electrical Requirements
•
SHKA4450, SHKA4450CC, SHKE4450 and
SHKE4450CC shakers require a 120 VAC, 60
Hz power source. They are supplied with a 3-
wire line cord and should be plugged into an
outlet designed for 3-prong plugs. If an exten-
sion cord is used, it also should be the 3-wire
grounded type. For an outlet designed to
accept 2-prong plugs (ungrounded), it is
required that a qualified electrician replaces the
outlet with a new, grounded type.
•
SHKA4450-1CE, SHKA4450CC-1CE,
SHKE4450-1CE and SHKE4450CC-1CE shak-
ers require a 240 VAC, 50/60 Hz power source.
They are supplied with a Schuko cordset.
•
If a plug must be installed, use only the 3-prong
grounded type, rated for the unit load require-
ments and matching the power outlet. Make
sure the green ground wire is secured to the
plug ground terminal.
•
To eliminate hazard of electrical shock, make
sure floor around shaker is dry. In the event of
accidental spilling or splashing of liquids, clean
up and/or neutralize the spilled liquids before
continuing.
•
Leave shaker disconnected when not in use.
12
U
NPACKING AND
I
NSTALLATION
Warning
Do not operate shaker with a dam-
aged electrical cord.
