Thermo Scientific Shake 'n Stack 6244, Руководство по эксплуатации и техническому обслуживанию

Страница: 9 / 92

1-2 Shake ‘n Stack Thermo Scientific
Section 1
Introduction
The Shake ‘n Stack is designed to be used with Thermo’s hybridisation
bottle. These high quality leak-proof containers can be used at
temperatures up to 70°C (for catalogue numbers, see Section 8).
Bottles should not be used above 70°C without taking the precaution of
releasing the pressure formed by the release of gases from solutions as they
are warmed. Simply loosening, then retightening the bottle cap at
approximately 60°C should relieve the pressure.
Caution Dropping or over-tightening lids can cause cracking and failure.
Lids should be inspected prior to each use.
s
Caution Always wear gloves when handling the bottle and use the bottle
gripper provided (see Appendix II for full instructions on Bottle Care).
s
Finally, the Shake ‘n Stack Oven is designed for reliability and ease of
maintenance. The rotisserie, shaking platform and drip tray can be easily
removed for cleaning.
Supply
Power rating: . . . . . . . . . . . . . . . . . . . . . . . . .250 W
Frequency: . . . . . . . . . . . . . . . . . . . . . . . . .50/60 Hz
Fuse rating: . . . . . . . . . . . . .110/120 V: 6.3A type T
. . . . . . . . . . . . . . . . . . .220/240 V: 1.6A type T
Ingress Protection Rating . . . . . . . . . . . . . . . . .IP22
Rotisserie speed control PCB fuse: . . . . . . . .500 mA
Note This item should not be serviced by the customer.
Working Environment: . . . . . . . . . . . .15°C to 25°C
Caution Care should be taken when lifting the Oven. It is advisable that
help is sought when removing an Oven from its packaging and when
stacking Ovens for use.
s
Caution During operation, caution should be taken with moving parts
that are accessible when the Oven door is open.
s
Thermo offers full service and technical support for all its products.
Alternatively, contact your local authorised distributor.
Safety Precautions
Oven Temperature
Monitoring (cont’d)