Thermo Scientific Shake 'n Stack 6244 Скачать руководство пользователя страница 47

Страница: 47 / 92

Appendix II

Hybidisation Bottle Safety

Use of the Bottle Gripper

• Part No. 222057 - fits 6 in. (15cm) short bottles

• Part No. 222056 - fits 12 in. (30cm) medium, long bottles

• Part No. 222055 - fits 12 in. (30cm) extra long bottles

This silicone rubber safety sleeve fits neatly over all our standard bottles
and is included with every oven we ship.

• Helping you to safely tighten and unscrew caps.

• Making handling of hot bottles easier.

For more details and ordering information, contact Technical Services or
your local distributor.

Our Hybridisation Bottles are made of thick-walled borosilicate glass,
which protects users from radiation and has excellent long-term reliability.

• It is important to check your bottles regularly for chips, stress fractures

and cracks. If these occur, discard the bottle.

• Ensure bottles are stored either in a suitable rack or with caps replaced

between experiments. This will protect the bottle and sealing area.

• Replace O-rings when worn or leaky. Replace all O-rings every six

months.

• Wear protective gloves to protect your hands in the event of accidental

breakage.

• Never over-tighten caps on bottles. Hand-tight is sufficient.

Caution

Dropping or over-tightening lids can cause cracking and failure.

Lids should be inspected prior to each use.

• If the bottle cap is difficult to unscrew, NEVER ATTEMPT to force

the bottle cap open. Allow the bottle to cool and retry. If the cap
remains stuck, discard the bottle.

• The bottles should not be used at temperatures above 70°C.

Shake ‘n Stack A-5

Thermo Scientific

Bottle Care

Содержание Shake 'n Stack 6244





























































































Результаты поиска

Содержание Shake 'n Stack 6244

Отзывы:

Похожие инструкции для Shake 'n Stack 6244

Бренды по названию

Популярные бренды

Thermo Scientific Shake 'n Stack 6244, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Shake 'n Stack 6244

Отзывы:

Похожие инструкции для Shake 'n Stack 6244

Бренды по названию

Популярные бренды