Thermo Scientific RadEye GF, Руководство по эксплуатации

Страница: 73 / 114

RadEye GF-Series DB-083 E 7-1
Le/Ff 20.07.2015
7. Trouble Shooting
7.1 RadEye doesn’t power on
7.1.1 Press “On” for at least one second
Keep the button “ ” pressed until the LED and the sound is
active. If the button is pressed only shortly, then the start up
routine is not activated. The LED may flash then only very
shortly.
7.1.2 Check battery
If the RadEye does not respond to a long press (> 1s) of the
“ ” button, then please use the following step by step proce-
dure:
A) Remove the current batteries
B) Clean the battery contacts
C) Check the required orientation of the batteries according to
the printed “+” symbols in the battery compartment.
D) Insert two -“AAA” with sufficient capacity: Rechargeable
AAA batteries should be completely loaded, non recharge-
able batteries should supply together at least 2.3 Volt under
load.
E) Press the “ ” button for more than one second (see also
7.1.1).