Thermo Scientific PrintMate A79510100 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 80

background image

Legal Information

Copyright 2009. Thermo Fisher Scientific. All rights reserved.

Thermo Shandon Limited is an ISO 9001 and ISO 13485 Accredited Company.

Thermo Fisher Scientific is the trading name of Thermo Shandon Limited.

All other trademarks are the property of Thermo Fisher Scientific and its subsidiaries

Thermo Fisher Scientific makes every endeavour to ensure that the information contained in its support
documentation is correct and clearly stated but does not accept responsibility for any errors or omissions. The
development of Thermo Fisher Scientific products and services is continuous. Make sure that any published
information that you use for reference is up to date and relates to the status of the product. If necessary, check
with Thermo Fisher Scientific or your local Thermo Fisher Scientific representative.

This manual may not, in whole or in part, be copied, photocopied, reproduced, translated, or converted to any
other electronic or machine readable form without prior written consent of Thermo Fisher Scientific.

All information contained in this manual is proprietary and confidential, and the exclusive property of Thermo
Fisher Scientific. This manual is protected by copyright and any reproduction is prohibited. This manual is for
use only by the individuals to whom it has been made available by Thermo Fisher Scientific.

Contact Addresses:

Anatomical Pathology Int., 93-96 Chadwick Road, Astmoor, Runcorn, Cheshire, WA7 1PR, UK

Tel: +44 (0) 1928 562 600; Fax: +44 (0) 1928 562 627; Web: www.thermo.com/pathology

Anatomical Pathology USA, 4481 Campus Drive, Kalamazoo, MI 49008, USA

Tel: 1-800-522-7270; Fax: +1 269-372-2674; Web: www.thermo.com/pathology

Standards

The Thermo Scientific PrintMate meets the following CE Mark requirements:

Low Voltage Directive 2006/95/EC, as amended by 93/68/EEC

«
1
2
3
4
5
...
»

Содержание PrintMate A79510100

















































































Отзывы:

Нет отзывов

Похожие инструкции для PrintMate A79510100

Бренд: Omnia Страницы: 8

Бренд: OfiTE Страницы: 21

Бренд: Earthlite Страницы: 4

Бренд: YATEK Страницы: 78

Бренд: Yamaha Страницы: 78

Бренд: Fast Страницы: 42

Бренд: DARAY Страницы: 28

Бренд: Haenim Страницы: 2

Бренд: UNIA Страницы: 62

Бренд: R2 Страницы: 20

Бренд: Baroness Страницы: 40

Бренд: Baroness Страницы: 40

Бренд: Haag-Streit Страницы: 16

Бренд: Mackie Страницы: 34

Бренд: Mackworth Страницы: 38

Бренд: P&P Страницы: 6

Бренд: Vatech Страницы: 137

Бренд: Vatech Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды