Thermo Scientific Neslab Dimax, Руководство пользователя

Страница: 24 / 30

- 22 -
DeviceNet
Messaging
Poll Command Message:
Byte 7 6 5 4 3 2 1 0
0 PUMP
PUMP = Command for pump to be on or off. 1 = on, 0 = off..
Respond Message:
Byte 7 6 5 4 3 2 1 0
0 Water Temperature (LSB)
1 Water Temperature (MSB)
2 Water Resistivity (LSB)
3 Water Resistivity (MSB)
4 Flow 1 (LSB)
5 Flow 1 (MSB)
6 Flow 2 (LSB)
7 Flow 2 (MSB)
8 Flow 3 (LSB)
9 Flow 3 (MSB)
10 Flow 4 (LSB)
11 Flow 4 (MSB)
12 Flow 5 (LSB)
13 Flow 5 (MSB)
14 Flow 6 (LSB)
15 Flow 6 (MSB)
16 Flow 7 (LSB)
17 Flow 7 (MSB)
18 Flow 8 (LSB)
19 Flow 8 (MSB)
20 Facility Water Flow (LSB)
21 Facility Water Flow (MSB)
22 AF WLW PUMP FW CB WLF
23 0 0 0 0 0 0 0 0
Upon receipt of a poll command, we will send the 23 bytes of data through the
DeviceNet. The 23 byte response is in accordance to the Device Net fragmen-
tation protocol of the DeviceNet Specification (revision 1.3).
CB = Cartridge Good/Bad, 1 = Good, 0 = Bad
WLF = Water Level Low Fault, 1 = Good, 0 = Bad
FW = Facilities Water Flow, 1 = Good, 0 = Bad
PUMP=Status of Pump, 1 = ON, 0 = OFF
AF = Autorefill Status, 1 = ON. 0m = OFF
WLW = Water Level Warning, 1 = OK, 0 = OFF