Thermo Scientific Multifuge X1R, Инструкция по эксплуатации

Страница: 22 / 58

4
Operation
Switch on centrifuge
4-2
Multifuge X1R
Thermo Scientific
Switch on centrifuge
1. Turn on the power switch on the back of the device.
The device performs a self-check of its software.
a. When the centrifuge lid is closed, the following display
shows:
The top line shows the speed and the time. Both lines display
0
. The temperature indicator
displays the current temperature inside the rotor chamber. The bottom line shows the values
for the last run.
b. When the centrifuge lid is open the following display shows:
The top line shows the message
lid open
. The bottom line shows the values for the last run.
Door opening
key. c. Press the
WARNING
Do not reach into the crack between the lid and the housing. The lid is
drawn shut automatically.
Use the emergency release only for malfunctions and power failures (see “Mechanical
emergency lid release” on page 7-2 ).
Close door
2. Close the door by pressing down on it lightly in the middle or on both sides of it. One lock closes
the lid completely.
Note
The door should audibly click into place.
Rotor installation
The approved rotors for the Multifuge X1R are listed in section “Rotor selection ” on page 1-6 .
Use only the rotors and accessories from this list in the centrifuge.