Thermo Scientific FTIR, Руководство пользователя

Страница: 12 / 83

The following table lists the specifications for electrical service. Contact our service representative in
your area if you have questions about the requirements.
Requirements Specifications
Input current 10 A (max.)
Input voltage 230 Vac
Line frequency 50 to 60 Hz
Line disturbances
Sags, surges or other line disturbances must not exceed 10% of input
voltage (even for a half cycle).
Noise
< 2 V (common mode)
< 20 V (normal mode)
Power cords
Use an appropriate power cord for the electrical service. The power cord supplied with the
spectrometer is a 3-wire, grounded power cord, appropriate for use in the country listed as the
shipping destination for the system. The main power supply cord can be replaced only by an
equivalent cable. If the power cord you received is not appropriate for the electrical system in your
location or if the power cord becomes damaged, contact us to order a new power cord.
A 10 A rated power cord must be used for each power cord.
Temperature and humidity
The FTIR Heated Valve Drawer is designed for indoor use at altitudes up to 2,000 M (6,500 ft). The
drawer itself operates reliably at temperatures between 16 °C and 27 °C (60 °F and 80 °F).
Maintain humidity at 20% to 80% non-condensing.
The safe environmental operating temperatures of the gas analysis system at your location may be
restricted by the safe operating parameters for the gas cell(s) used with your analyzer or
spectrometer.
Thermo Scientific Modular Gas System User Guide 7
Site requirements and safety information