III–11
Thermo Scientific Cryofuge 8 / 16 Centrifuges and Heavy Duty Centrifuges
Operation
7. Programs
For detailed instructions and information refer to the according manual for the Thermo Scientific Centri-Touch User Interface.
The instructions stated here are just an extract of how to work with programs.
1. Press on the touchscreen.
If a program is already loaded, the program name will be shown on the button.
Figure III–13:
Select program
2. Press
New
.
a. Check the parameter. Change the parameter if necessary.
To change a parameter, press the button of the parameter you want to change.
Press
Apply
.
b. Press
Enter Name
.
Enter a name for the program.
Press
Apply
.
c. Press
Select Rotor
.
Select a rotor.
Press
Apply
.
Select a bucket using the drop-down menu.
Press
Apply
.
3. Press
Apply
to save the program.
4. Press the new created program.
Press
Load
.
The program is now loaded and can be used.
