Thermo Scientific BRAHMS KRYPTOR compact PLUS, Руководство пользователя

Страница: 32 / 60

B·R·A·H·M·S GmbH
B·R·A·H·M·S KRYPTOR compact PLUS User Manual (Version R08en) Page 23 of 30
Detailed information about consumables and
patient samples
By clicking and holding the left mouse button an infor-
mation window appears.
1. Buffer
2. SOLUTIONS 1-4
3. Dilution plates
4. Reagent cassette
5. Patient samples
6. Reaction plate
7. Reagent
Sample ID barcode
It is forbidden to use a sample barcode starting with “R“
or “_“. In these cases, problems occur on interface.
Manual entry of consumables and reagents
In case of barcode reading problem, it is possible to
load barcode information by manual entry with the key-
board. Click with the right mouse button on the corre-
sponding area. A specific window for manual entry of
the barcode data will open.
When a consumable is loaded by manual entry, it is
marked by a symbol (not reaction plate) and on
session log.
If during a scan, a barcode is detected in place of
manual entry ID, scan reading has priority, ID con-
sumable detected by scan erases manual entry ID.
This action is indicated in session log.
Interface drawing of tray positioning may differ from
actual tray position. For manual entry make sure that
place ments of reagent kits are done correctly as illust-
rated below.
Reagent kit placement
Check the kit’s correct position in
reagent tray with kit notch towards to
the transparent window. A kit misposi-
tioning could impact data results.
Caution
Manual identification of consumables or sample
tubes is under user responsibility. Entering incorrect
data may lead to wrong result. This option is to be
used only in case of barcode read ing fault while
waiting for repair of problem cause.
Important User Information
Notch
1
2 3
4
1
2
3
4
1
2
3
4
4
3
2
1