Thermo Scientific BF51634BC-1, Инструкция по установке и эксплуатации

Страница: 47 / 78

Communication Option
Auto Tuning the Controller
Thermo Scientific 7-9
The controller will cycle three times through a heating and cooling pattern.
measuring the characteristics of the load and chamber temperature controls.
During the auto [lining. At will alternately flash with the measured temperature
(PV) to indicate that the auto tuning is in progress. The length of time for the auto
tune varies with the load, chamber size and temperature selected.
The auto tune is completed when the regular display of the measured temperature
is shown. The chamber should now
operate to the process temperature with the given product load, with the quickest
response and minimal temperature overshoot.
If the process temperature or load changes significantly, another auto tune
session may be necessary to optimize the chamber performance.