Pretreatment system
Transport and Packaging | 3
Transport and Packaging
Pretreatment systems are carefully inspected and packed
prior to shipping, but damage could still possibly occur during
transport. Lifting and carrying the Thermo Scientific
Barnstead Pretreatment system, e.g. to the installation
location, can carried out by one person.
Examination on Receipt
1. Ensure all components for complete system were
ordered and received. This should include:
•
Pretreatment system - 50157886
•
1
μ
m Prefilter - D502113
•
MPS Cartridge - D502114
•
Carbon Cartridge - D502115
•
Wall bracket (if wall mounting)
•
TU494X4 6 ft (1.8 m) of ¼ OD tubing
•
Feed-water Connection kit - 25.0071
2. Carefully unpack system and inspect system for damage.
Note:
If the packaging show signs of damage, inspect the
system for damage.
Figure 1. Unpacking
Complaints
If there has been any damage occurred to the goods during
transportation:
•
Immediately contact your delivery transport agency.
•
Save the complete packaging, including the cardboard
box, for a possible inspection of them and/or return
shipment of the system.
Packaging for Return
Shipment
If possible, use the original box and packaging material. When
these are no longer available, then:
•
Protect the system from shock by packing it in bubble
wrap and/or packaging foam and a strong cardboard
box.
Note:
The time limit for claims is 6 days from the time of
receipt of the goods. The right to claim for damages ceases
when this time has elapsed.
Note:
•
Only a trained person should take the system out of
operation.
•
Prior to sending back an operated device, empty the
water, dry the system and take out the cartridges.
•
Pack the cartridges into a bubble wrap and/or packaging
foam and put it into the package of the Pretreatment
system.
DANGER:
Do not pull the plastic foil over your
head. Risk of suffocation. Use the plastic foil only
for packaging.
