Thermo Scientific Applied Biosystems GeneChip 645, Руководство пользователя

Страница: 9 / 29

GeneChip
™
Hybridization Oven 645 User Guide
9
Chapter 1
The Hybridization Oven 645
Unpacking and setup
1
Rear panel items
The following items are located on the rear panel (Table 2) .
Operating the door
1.
The door is hinged on the left of the unit and latches on the right. It opens with a
firm pull on its handle, located at the right side of the door.
2.
When the door unlatches, if the oven is ON, the Door Open indicator will
illuminate, rotisserie rotation will stop and the heater will shut off.
3.
The door swings open up to 180
°
, allowing easy access to the oven interior. Take
care not to forcefully overextend the door and ensure that the bench is clear of
objects that may be hit by the door.
4.
Take care when opening the door while the oven is operating. The interior is hot.
Avoid immediate contact with the interior or wear protective gloves.
5.
To close the door, swing it shut and press the door until it latches. Normal
operation will resume.
Table 2
Rear panel items.
Item What it does How to use
Power entry module /
line filter / fuse holder
Accepts power cord for providing line power to
unit. Filters incoming and outgoing power line
noise. Holds fuses for overcurrent protection.
Plug mating end of power cord into this
connector. Plug other end into suitable
power outlet.
Use your fingers or a screwdriver to
open the fuse holder to replace the two
fuses (See the section,
"Replacing the
fuses" on page 22 ).
Voltage selector
You can manually change the oven voltage from
115V to 230V.
With a screwdriver, flip the switch to
select the required voltage.
Caution! Take care to set the correct
voltage for the oven. An incorrect
voltage setting will damage the oven.
Serial port
The serial port allows communication with the
workstation.
Connect the oven with the serial port of
the computer (RS-232).