GeneChip
™
Hybridization Oven 645 User Guide
19
Chapter 1
The Hybridization Oven 645
Operating the oven
1
10.
Close the oven door, set the temperature and set the rotisserie speed if needed.
11.
At the conclusion of processing, open the oven door. The rotisserie stops and the
heater shuts off. Wait for the oven surfaces to cool to a comfortable temperature,
then unload the rotisserie.
Unloading the
rotisserie
• Open the door and use the rotisserie motor pause button to jog the rotisserie so
that a carrier faces the front of the unit. The temperature warning light turns on.
This can be ignored.
• Pull on the ring of the retainer clip to release the carrier. Pull it straight out of the
rotisserie.
• Use the jog feature and repeat.
• The retainer clips can remain on the rotisserie. They do not need to be removed.
• The oven is ready for a new load of arrays. If the oven will not be used
immediately, turn the power switch off.
Figure 17
Installed cartridge carriers with the retaining clips set on the carriers.
Note that the carriers are placed 180° apart to balance the rotisserie.
