Thermo King UT-1280, Руководство оператора

Страница: 53 / 83

Unit Operation
51
• Alarm Code 91 Check Electric Ready Input is cleared by
turning the unit off and back on. See SWITCHING FROM
ELECTRIC TO DIESEL in this section.
Sending a ServiceWatch Data
Logger Start of Trip
When the unit is turned on, press and hold the ENTER Key for
5 seconds to send a Start of Trip (SOT) marker to the unit
ServiceWatch Data Logger and the optional DAS Data Logger
(if equipped).
Figure 40: ENTER Key
Pretrip Test
A Pretrip Test verifies unit operation. The PRETRIP Key
allows either a Full Pretrip Test or an Engine Running Pretrip
Test to be initiated by the operator.
Pretrip Test Conditions
• The current unit settings are saved and restored at the end
of the Pretrip Test or if the unit is turned off and back on.
• The Pretrip Test can be run in either Diesel or Electric
Mode.
• The unit will auto switch from Diesel Mode to Electric
Mode or from Electric Mode to Diesel Mode during a
Pretrip Test if these features are enabled and the auto
switch conditions occur.
Conditions where Pretrip Tests are
not allowed
• Pretrip Tests are not allowed if any shutdown alarms are
present.