Thermo King UT-1280 Скачать руководство пользователя страница 24

Страница: 24 / 83

Emission Control

•

Premium of overtime cost.

•

Cost to investigate complaints that are not caused by
defect in Thermo King material or workmanship.

•

Providing timely notice of a warrantable failure and
promptly making the product available for repair.

Limitations

Thermo King is not responsible for resultant damages to an
emission-related part or component resulting from:

•

Any application or installation Thermo King deems
improper as explained in this Operator’s Manual, or any
other manuals provided with the unit.

•

Attachments, accessory items, or parts not authorized for
use by Thermo King.

•

Improper off-road engine maintenance, repair, or abuse.

•

Owner’s unreasonable delay in making the product
available after being notified of a potential product
problem.

This warranty is in addition to Thermo King’s standard
warranty applicable to the off-road engine product involved.

Remedies under this warranty are limited to the provision of
material and services as specified herein. Thermo King is not
responsible for incidental or consequential damages such as
downtime or loss of engine-powered equipment.

Содержание UT-1280



















































































Результаты поиска

Содержание UT-1280

Отзывы:

Бренды по названию

Популярные бренды

Thermo King UT-1280, Руководство оператора

Результаты поиска

Содержание UT-1280

Отзывы:

Бренды по названию

Популярные бренды