TK 61552-2-MM-EN
115
Figure 87.
Gasket Tool P/N 204-424
5.
Remove the four bolts from the valve.
6.
Remove the end cap and spring.
7.
Remove the spring clip which secures the stem to the piston. Slide piston off the stem.
8.
Remove the seat and stem assembly.
9.
Inspect the following parts for wear or damage:
•
Bottom cap, sealing, and support area.
•
Seat, sealing surface.
•
End cap, sealing, and support surface.
The following parts will be discarded:
•
Stem assembly.
•
All gaskets.
•
Piston seal.
10. Remove the screen. If any particles drop from the screen into the discharge line, the
discharge line must be removed at the compressor.
N
No
otte
e:: The valve body cannot be reconditioned. Seat positions change and improper sealing
will result.
