Thermo King SB-200TG, Руководство по эксплуатации

Страница: 77 / 121

Alarm Codes
76
75 µP Internal Fault Code Controller may be defective, repair immediately. X
76 µP Internal Fault Code Controller may be defective, repair immediately. X
77 µP Internal Fault Code Controller may be defective, repair immediately. X
78 µP Internal Fault Code Controller may be defective, repair immediately. X
79 Data Log Overflow
Data logger missed logging one event, no action required,
clear alarm.
X
80 Compressor Temp Sensor Compressor protection reduced, repair as required. X
81 High Comp Temp Compressor operating above temp limits, repair as required. X
82 High Comp Temp Shutdown
Compressor shut down to prevent damage, repair
immediately.
X
83 Low Coolant Temp
Reduced heating capacity, monitor box temp and engine
temp, repair as required.
X
Table of Alarm Codes
*Alarms with an asterisk (*) can exist with Alarm Code 84. The alarm can clear automatically if condition does not reoccur.
NOTE: Not all alarm codes are available with all microprocessor controllers or all revisions of software.
Code Description Corrective Action
Level Of
Action
Ok
T
o
Run Ch
eck
S
hut
Dow
n
Alarm Codes
76
75 µP Internal Fault Code Controller may be defective, repair immediately. X
76 µP Internal Fault Code Controller may be defective, repair immediately. X
77 µP Internal Fault Code Controller may be defective, repair immediately. X
78 µP Internal Fault Code Controller may be defective, repair immediately. X
79 Data Log Overflow
Data logger missed logging one event, no action required,
clear alarm.
X
80 Compressor Temp Sensor Compressor protection reduced, repair as required. X
81 High Comp Temp Compressor operating above temp limits, repair as required. X
82 High Comp Temp Shutdown
Compressor shut down to prevent damage, repair
immediately.
X
83 Low Coolant Temp
Reduced heating capacity, monitor box temp and engine
temp, repair as required.
X
Table of Alarm Codes
*Alarms with an asterisk (*) can exist with Alarm Code 84. The alarm can clear automatically if condition does not reoccur.
NOTE: Not all alarm codes are available with all microprocessor controllers or all revisions of software.
Code Description Corrective Action
Level Of
Action
Ok
T
o
Run Ch
eck
S
hut
Dow
n