Operating Instructions
47
Turning The Unit Off
Pressing the OFF Key stops unit operation. The unit shuts
down immediately and the display briefly shows the power
down message (Figure 34).
Figure 34: Power Down Message
The display briefly shows OFF (Figure 35) and then goes
blank. To start the unit again, press the ON Key.
Figure 35: Display Shows OFF
The Standard Display
The Standard Display is the default display that appears if no
other display function is selected. The Standard Display shows
the box temperature and setpoint. The box temperature is that
measured by the controlling sensor, usually the return air
sensor. The box temperature in Figure 36 is 35.8 F (2.1 C) with
a 35 F (1.7 C) setpoint.
Figure 36: Standard Display
The down-pointing arrow at the left side of the
display shows the unit is cooling. If the arrow
were pointing upward the unit would be heating.
ON
OFF
SYSTEM IS POWERING DOWN
OFF
ON
OFF
ON
OFF
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
Содержание Precedent C-600
Страница 18: ...Safety Precautions 17 Do Not Use Ether Starting Aids Figure 5 Do Not Use Ether Starting Aids Near Engine...
Страница 200: ...Serial Number Locations 199 Figure 190 Engine Serial Number Location Figure 191 Unit Serial Number Plate Locations...
Страница 204: ...203 CALIFORNIA Proposition 65 Warning Diesel exhaust is a chemical known to the State of California to cause cancer...