Unit Description
24
Electric Operation
In electric operation the microprocessor will select the
operating mode from the following:
•
Cool
•
Modulated Cool
•
Null (CYCLE-SENTRY operation only)
•
Modulated Heat (Hot Gas only)
•
Hot Gas Heat
•
Full Heat (Hot Gas and Electric Heat)
•
Defrost (Hot Gas and Electric Heat)
CYCLE-SENTRY
TM
Start-Stop
Controls
The CYCLE-SENTRY Start-Stop fuel saving system provides
optimum operating economy.
When CYCLE-SENTRY Mode is selected the unit will start
and stop automatically to maintain setpoint, keep the engine
warm and the battery charged. When Continuous Mode is
selected, the unit starts automatically and runs continuously to
maintain setpoint and provide constant airflow.
WARNING: The unit can start at any time without
warning. Press the
O
FF
key on the control panel and
place the microprocessor On/Off switch in the Off
position before inspecting or servicing any part of the
unit.
Your Thermo King unit provides a wide range of
control and programming flexibility. However,
pre-programming of the unit SR-4 microprocessor
may prohibit operation in certain temperature ranges
within some modes and may also prohibit certain
modes of operation. If you have controller
programming questions, contact your supervisor or
your Thermo King dealer before requesting service.
Содержание Precedent C-600
Страница 18: ...Safety Precautions 17 Do Not Use Ether Starting Aids Figure 5 Do Not Use Ether Starting Aids Near Engine...
Страница 200: ...Serial Number Locations 199 Figure 190 Engine Serial Number Location Figure 191 Unit Serial Number Plate Locations...
Страница 204: ...203 CALIFORNIA Proposition 65 Warning Diesel exhaust is a chemical known to the State of California to cause cancer...