3
General Installation Precautions and Specifications
For best results when applying the panel adhesive, ensure the surface is completely clean using Isopropal
alcohol or appropriate de-greasers. Ensure all cleaning residue is removed and the surface is dry.
IMPORTANT: The solar panel, application surface and air temperature must all be above 1.3 C.
•
The adhesive backing is very aggressive and is difficult to remove once installed.
•
Always ensure the solar panel fuse (located on the terminal connection harness) is removed during
installation and service.
•
Locate the charge controller near the unit electrical connection to avoid voltage loss in the cable.
SLXi, SLXe, SLX Unit Installation (Trailer Applications)
1. Switch unit controls to the off position and disconnect the positive battery cable.
2. Temporarily remove the fuse from solar panel harness. (See Step 10 of Procedure)
3. Prepare/clean an area on the top of the trailer body for the solar panel (see illustrated by dotted line below)
and position the panel as shown.
NOTE: Adhesive should not be used if the solar panel is to be transferred to another trailer - Use the
fasteners only.
CAUTION: Make sure that the surface temperature and the air temperature is above1.3 ° C.
.
WARNING: Always wear safety glasses and protective gloves when working with batteries.
BEN138
Содержание Ingersoll Rand NAD 100W
Страница 2: ...2 BEN137 ...
Страница 20: ...20 Figure 3 Testing Connections BEN147 ...