Thermo King Ingersoll Rand NAD 100W, Руководство по установке

Страница: 19 / 22

19
TEST PROCEDURE
NOTE: Trailer Application shown here for illustration purposes, however, the steps are the same for
Domestic Refrigerated Containers (DRC) application.
To properly test the solar output you must have the following items:
• Halogen lamp (500W or greater) or be outdoors in the daylight.
• Voltage meter
• Ammeter
1. Put voltmeter on the battery and measure the voltage.
• Voltage must be less than 12.8V for the solar panel controller to turn on.
• If battery voltage is not less than 12.8V then put a 12V load on the battery.
2. If indoors, put at least a 500W halogen lamp approxiamately 600mm above the solar panel and
turn it on.
3. Put Ammeter around the positive cable from the solar panel.
• Voltage reading should begin increasing or stay the same.
• Amperage reading should be greater than 0.300 mA
NOTE: The solar panel controller may take up to a minute to turn on. The solar panel must be connected to
the battery in order to turn on the charge controller.
BEN146